Internal transport
We move heavy and bulky industrial workpieces safely within our workshop. This allows larger structures to be handled with care, from arrival to delivery.
View service Blasting, coating and more
Services for industrial workpieces
Satink carries out the required stages in its own climate-controlled workshop in Hengelo. From internal handling and preparation to surface treatment and completion.
From arrival to delivery
Seven services in one integrated process
The work is grouped into preparation, surface treatment and completion. For each workpiece, the project specification and required treatment determine which stages are needed.
Handling and preparation
Careful preparation and internal handling form the basis of a controlled treatment process.
Manual cleaning and degreasing
Grease, oil and dirt are removed by hand before blasting. This prevents contamination from being blasted into the surface.
View serviceMasking and plugging
Areas that must not be treated, such as flange faces, threaded holes, shafts and bores, are carefully masked or plugged before the workpiece enters the blasting or spray booth.
View serviceSurface treatment
Treatments are matched to the component, substrate, next process step and project specification.
Abrasive blasting
Abrasive blasting removes rust, mill scale and old coatings and gives the surface the right profile for the next step. Depending on the material and application, we use steel grit, glass bead or corundum.
View serviceFilling and sealing
Where the specification or required appearance calls for it, irregularities are filled and seams, overlaps and gaps are sealed before the coating system is applied.
View serviceWet paint coating
After thorough surface preparation we apply a suitable coating system, usually two-pack. The build-up is matched to the corrosivity category, the application and the required finish of the workpiece.
View serviceCompletion
After final inspection the workpiece is protected, packed and prepared for transport.
Packaging
After final inspection, workpieces are packed with protection for transport and storage, matched to the workpiece and the agreements with the customer.
View serviceWhich treatment does your workpiece require?
Send your drawing, photograph or description through the contact form so we can assess your enquiry.
