Manual cleaning and degreasing
Components can be manually cleaned and degreased before surface treatment.
Our services
Wet paint coating
After thorough surface preparation, we apply a suitable protective coating system. The build-up is matched to the application, environment and project specification.
Tailored protection
A wet paint coating system is applied to a properly prepared substrate. Where required for the finish, filling and sealing takes place before coating.
During the process, we perform the agreed quality inspections. After final inspection, the workpiece can proceed to packaging.
Preparation
A sound basis for the coating system
The preparation required is determined for each workpiece and project specification.
Masking and capping
Areas that must not be treated can be carefully protected, masked or capped.
Filling and sealing
Where required, surfaces and joints can be prepared using appropriate filling and sealing methods before the selected coating system is applied.
Capabilities
What we can apply
The available options and exact system build-up are agreed for each project.
Climate-controlled spray booths
Coating systems can be applied under controlled conditions.
Corrosivity categories C1 through C5 and CX
Depending on the application and project specification, we can apply coating systems selected for corrosivity categories C1 to C5 and CX in accordance with ISO 12944. The exact coating system is confirmed for each project.
Specialist coating systems
We apply heat-resistant coating systems and coating systems for potable-water applications, matched to product specifications and project requirements.
Two-component products
Two-component coating products are commonly applied.
Completion
Packaging to the project agreement
Depending on the project and agreed requirements, treated components can be prepared or protected for internal handling, storage or onward transport.
The agreed inspections, measurements and reporting are completed during the process. See our quality-control page for the available checks.
Need advice on the right coating system?
We are happy to discuss which system build-up matches your project specification.
