Steel grit
For steel structures and heavier work
Steel grit thoroughly removes rust, mill scale and old coatings and gives the steel a surface profile suitable for protective coating.
Our services
Abrasive blasting
Durable corrosion protection starts with proper surface preparation. We remove rust, mill scale and old layers and give the surface the right profile for the next step.
Why blasting?
Areas that must not be treated are masked or plugged beforehand. Blasting removes rust, mill scale, old paint layers and contamination, producing a profile for the next step.
The blasting abrasive is selected according to the material, surface condition and required result. Next steps include filling and sealing and wet paint coating.
Abrasives
Three abrasives, one right choice
For every job we select the abrasive that suits the material and the desired result.
Corundum
For hard substrates and targeted work
Corundum is a hard, sharp abrasive for applications that require more aggressive cleaning or a specific profile.
Glass bead
For a fine, smooth finish
Glass bead cleans and peens the surface without attacking it aggressively. Suitable for stainless steel and aluminium, among others, and for an even, satin finish.
How we work
Our approach
A fixed process with clear checkpoints, from delivery to next step.
-
Intake and advice
We discuss the workpiece, the condition of the surface and the required result, and advise on the blasting abrasive and follow-up treatment.
-
Delivery and preparation
You deliver the materials by appointment. Where necessary, parts are masked or delivered disassembled.
-
Blasting
The surface is blasted to the agreed cleanliness and roughness.
-
Inspection
We check the result visually and against the specification agreed with you in advance.
-
Next step
The blasted work moves straight on to protective coating, or is delivered back to you clean and protected.
Applications
What we blast
The suitable blasting method and abrasive depend on the substrate, contamination, required roughness and subsequent coating system.
- Cast iron
- Steel
- Stainless steel
- Aluminium
- Brass
- Wood
- Other suitable materials
Technical capacity
Two blasting booths
Booth dimensions are shown as length × width × height. Practical options are assessed for each component.
Steel-grit blasting booth
length × width × height 15.00 × 4.50 × 4.50 m
Glass-bead blasting booth
length × width × height 5.50 × 3.50 × 3.50 m
Quality
Measurable results
Blasting is only finished when the surface meets the agreed specification. Cleanliness and roughness are assessed according to the agreements we record with you in advance.
If the work then moves on to protective coating, we manage the transition between steps: a blasted surface receives its first protective layer in good time.
Discuss abrasive blasting for your project
Contact us or call to discuss your project.
